WISMEC Luxotic NC 250W 20700 Kit with Guillotine V2 – Red Resin

Here comes the WISMEC Luxotic NC Kit. It consists of a WISMEC Luxotic NC MOD with a Guillotine V2 RDA. Powered by dual 20700 cells, the Luxotic NC fires up to a maximum output of 250W! The all-new 24mm Guillotine V2 RDA has a dual-coil post deck with a large space for easy coil building. The Luxotic NC comes with a BF pin to make it compatible with squonk MODs too. No hesitation, just get this device now!

Parameters

Luxotic NC MOD
Size: 96.2 x 54.5 x 26.6mm
Thread type: 510 spring-loaded connector
Cell type: Dual high-rate 20700/18650 cell (NOT included)
Voltage Range: 1.3V-5.3V
Max output wattage: 250W

Guillotine V2 RDA
Height: 34.8mm
Diameter: 24mm
Coil building: Dual coil

Designed by JayBo
Compatible with Dual 18650/20700 Batteries
Optional Output Mode in Series and Parallel
Multiple Circuit Protection Systems

It comes with

• 1x Luxotic NC Box MOD
• 1x Guillotine V2
• 2x Battery Sleeve
• 2x Pre-made Clapton 0.18ohm Coils
• 1x Mouthpiece
• 1x Cotton
• 2x User Manual
• 1x Warning Card
• Spare Parts

Simple packing. Customary packing from the factory, the packing is subject to change without notice.

Power on/off: Push the bottom cover and take it away, put two 20700 cells ( or two 18650 cells with the help of battery sleeve) into the battery body. Put the bottom cover back on and then the indicator light will flash 3 times to indicate that the device is ready for use. For the device with installed battery, you can press the fire button 5 times in quick succession to turn the device on and off.

Vaping: Long press the fire button to take a puff.

Charging: Take out the cells and charge them through external charger.

Switch between Series and Parallel Mode:
By pushing the mechanical switch to the left, you can switch to the parallel mode with the indicator light flash 5 times. The indicator light will keep in white while vaping under parallel mode.
By pushing the mechanical switch to the right, you can switch to the series mode with the indicator light flash 5 times. The indicator light will keep in red while vaping under series mode. Moreover, you can adjust the voltage from 1.3V to 5.3V by rotating the voltage regulator under this mode, clockwise to increase and counterclockwise to decrease.